Experimental Study on Progressive Collapse Resistance of Fully Assembled Precast Concrete Frames under Static Loading

Authors

  • Yujie Huang Shenzhen Institute of Building Research Co., Ltd., Shenzhen 518000, Guangdong, China

DOI:

https://doi.org/10.6919/ICJE.202611_12(11).0008

Keywords:

Fully Assembled Precast Concrete Frame; Progressive Collapse; Beam-column Dry Connection; Quasi-static Pushdown Test.

Abstract

To examine how a fully assembled precast concrete frame resists progressive collapse, three half-scale subassemblies were prepared for a middle-column removal test: one monolithic reinforced concrete specimen (RC) as the baseline, and two precast joint specimens distinguished by corbel detail-PC1 with an exposed corbel and PC2 with a hidden corbel. Their load-resisting mechanisms and failure modes were compared under the same quasi-static pushdown protocol. The monolithic RC specimen developed both compressive arch action (CAA) and catenary action (CA); its second, catenary-stage peak reached roughly 22% above the CAA peak. PC2 likewise showed a two-stage response, yet its catenary mechanism remained underdeveloped, with the catenary peak at only 79% of the arching peak. PC1 stopped after the arching stage, failing through shear fracture of its dowel bars. Relative to RC, the CAA peaks of PC1 and PC2 stood at 76% and 81%, while their side-column restraint stiffness was comparable to the monolithic baseline. The test observations are expected to inform the collapse-resistant design of fully assembled precast frames.

Downloads

Download data is not yet available.

References

[1] Liu, Y. L., Li, Y., Zhao, Z. D., Diao, M. Z., & Sun, H. L. (2022). Experimental study on progressive collapse resistance of monolithic precast concrete frame structures. Journal of Building Structures, 43(Suppl.1), 123–132.

[2] Gu, X. L., Zhang, B., Huang, X. K., Yu, Q. Q., & Deng, T. H. (2022). Experimental investigation on progressive collapse resistance of precast concrete frame structures with different beam-column connections. Journal of Building Engineering, 51, Article 104280. https://doi.org/10.1016/j.jobe.2022.104280

[3] Shi, Y. C., Li, L. M., Guo, H. S., Li, Z. X., Shi, P. F., Zhao, B., Zhou, J., Liu, H. K., & Guo, Z. P. (2023). Experimental study on top corner column removal of a five-story full-scale precast prestressed efficiently fabricated frame. Journal of Building Structures, 44(5), 1–12. https://doi.org/10.14006/j.jzjgxb.2021.0808

[4] Zhao, Z. D., Cheng, X. W., Li, Y., Guan, H., Zhang, W., & Liu, Y. (2023). Progressive collapse analysis of precast reinforced concrete beam-column assemblies with different dry connections. Engineering Structures, 287, Article 116186. https://doi.org/10.1016/j.engstruct.2023.116186

[5] Liu, Y., Zhao, Z. D., Cheng, X. W., Li, Y., Diao, M. Z., & Sun, H. L. (2022). Experimental and numerical investigation of the progressive collapse of precast reinforced concrete frame substructures with wet connections. Engineering Structures, 259, Article 114157. https://doi.org/10.1016/j.engstruct.2022.114157

[6] Yang, T., Xie, Y. K., & Hao, T. Z. (2023). Experimental study on dynamic collapse behavior of precast concrete frame substructures. Journal of Disaster Prevention and Mitigation Engineering, 43(2), 245–254.

[7] Qian, K., Liang, S. L., Fu, F., & Li, Y. (2022). Progressive collapse resistance of emulative precast concrete frames with various reinforcing details. Journal of Structural Engineering, 148(6), Article 04022064. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003246

[8] Li, Z. X., Liu, H. K., Shi, Y. C., Ding, Y., & Zhao, B. (2021). Experimental investigation on progressive collapse performance of prestressed precast concrete frames with dry joints. Engineering Structures, 247, Article 113147. https://doi.org/10.1016/j.engstruct.2021.113147

Downloads

Published

2026-11-15

Issue

Section

Articles

How to Cite

Huang, Y. (2026). Experimental Study on Progressive Collapse Resistance of Fully Assembled Precast Concrete Frames under Static Loading. International Core Journal of Engineering, 12(11), 73-78. https://doi.org/10.6919/ICJE.202611_12(11).0008