Research and Application of Intelligent Sensing Technology in Three-Sided CNC Punching System for Automotive U-Shaped Longitudinal Beams

Authors

  • Ke Li Institute of Automation, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250014, China
  • Lunbin Liu Institute of Automation, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250014, China
  • Yi Hao Jinan Kaifeng CNC Machinery Co., Ltd., Jinan 250300, China
  • Xueming Li Jinan Kaifeng CNC Machinery Co., Ltd., Jinan 250300, China
  • Zhongmin Wang Institute of Automation, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250014, China

DOI:

https://doi.org/10.6919/ICJE.202611_12(11).0006

Keywords:

Computer Numerical Control (CNC); Intelligent Sensing Technology; Punching System; U-Shaped Longitudinal Beam.

Abstract

In this study, an intelligent sensing system of CNC three-side punching equipment for automotive U-shaped longitudinal beams based on multi-sensor fusion is developed. Kalman filtering, Dempster-Shafer (D-S) evidence theory, and convolutional neural networks (CNNs) are adopted for multi-source data fusion and processing. In addition, Geometric and thermal error models are established based on Chebyshev polynomials and thermoelastic equations, and online error compensation is realized through embedded algorithms in the computer numerical control (CNC) system. This intelligent sensing technology effectively enhances the intelligence level, operational reliability, and machining quality of the system, provides a feasible technical solution for the intelligent upgrading of processing equipment for automotive U-shaped longitudinal beams, and promotes the development of intelligent manufacturing in the automotive industry. The experimental results demonstrate that the developed equipment achieves punching accuracy within ±0.05mm, and reduces the hole spacing error to ±0.03mm.

Downloads

Download data is not yet available.

References

[1] Li, K., Liu, L. B., Hao, Y., et al. (in press). Digital twin of three-sided CNC punching system for automotive U-shaped longitudinal beams: Modeling research. World Scientific Research Journal.

[2] Li, Y., Zhao, Z. C., Fu, Y. C., et al. (2024). Dynamic data-driven degradation method for monitoring remaining useful life of cutting tools. Measurement, 237, 115247. https://doi.org/10.1016/j.measurement.2024.115247

[3] Zhou, J., Liu, X. Y., Liao, Q. H., et al. (2025). Multi-sensor heterogeneous signal fusion transformer for tool wear prediction. Sensors, 25(15), 4847. https://doi.org/10.3390/s25154847

Downloads

Published

2026-11-15

Issue

Section

Articles

How to Cite

Li, K., Liu, L., Hao, Y., Li, X., & Wang, Z. (2026). Research and Application of Intelligent Sensing Technology in Three-Sided CNC Punching System for Automotive U-Shaped Longitudinal Beams. International Core Journal of Engineering, 12(11), 60-64. https://doi.org/10.6919/ICJE.202611_12(11).0006