Application and Performance Analysis of Low-NOx Combustion Technology in Metallurgical Heating Furnaces

Authors

  • Wenmei Nie Shanghai Baoye Metallurgical Engineering Co., Ltd., Shanghai, China

DOI:

https://doi.org/10.6919/ICJE.202611_12(11).0003

Keywords:

Low-NOx Combustion; Reheating Furnace; Staged Combustion; Flue Gas Recirculation; Thermal Efficiency; Temperature Uniformity.

Abstract

Nitrogen oxide emissions from gas-fired reheating furnaces remain a major barrier to cleaner steel rolling, yet retrofit decisions are often made without field data linking emission reduction to heating quality and fuel use. This study reports the retrofit of a 150 t/h walking-beam slab reheating furnace fired with natural gas. Its conventional nozzle-mixing burners were replaced by staged-air low-NOx burners, combined with external flue gas recirculation at 12% and an air–fuel ratio control system with oxygen trim. Two groups of 84 hourly records, collected before and after the retrofit at loads of 60% to 100%, were compared with Welch’s t-tests and simple linear regression. The NOx concentration, referred to 8% oxygen, fell from 236 to 92 mg/m³, a reduction of 61.0%, and the reduction stayed between 59% and 63% across the load range. Thermal efficiency rose from 71.6% to 74.9%, specific gas consumption fell from 38.6 to 36.9 m³/t, and the transverse spread of slab discharge temperature decreased from 14.6 to 9.8 °C. Carbon monoxide increased from 28 to 41 mg/m³, which is the main cost of lower excess air and diluted combustion. The results indicate that, in air-preheated gas-fired furnaces, staged combustion with moderate recirculation can lower NOx substantially without sacrificing heating quality, provided that flame stability and CO are monitored.

Downloads

Download data is not yet available.

References

[1] Lee, H., Seo, D. M., & Jung, W.-N. (2025). Experimental investigation of NOₓ emission reduction and efficiency improvement in a reheating furnace using multiple fuel-flow-pulsed burners. Fuel, 394, 135131. https://doi.org/10.1016/j.fuel.2025.135131

[2] Cho, S. H., Lee, G., Lee, B. J., Song, A., Lee, C., & Lee, K. M. (2025). Impact of flue gas recirculation methods on NO emissions and flame stability in a swirling methane burner. Applied Thermal Engineering, 261, 125139. https://doi.org/10.1016/j.applthermaleng.2025.125139

[3] Niu, Y., Tan, F., Wang, X., Li, F., Wang, S., Atig, I. I., Li, D., & Liao, M. (2026). Numerical investigation on slab heating progress and emission characteristics of the walking-beam reheating furnace with different natural gas/ammonia blending strategies. Applied Sciences, 16(2), 575. https://doi.org/10.3390/app16020575

[4] Xue, P., Kuang, M., Ge, Z., Hong, Y., & Zhu, X. (2026). Establishing an efficient staged FGR pattern in the layer combustion zone for upgrading the low-NOₓ performance of an industrial-scale coal-fueled grate furnace. Thermal Science and Engineering Progress, 69, 104438. https://doi.org/10.1016/j.tsep.2026.104438

[5] Geng, J., Li, X., Meng, F., & Song, D. (2026). Numerical simulation of the combustion process of an ammonia burner in a metallurgical regenerative heating furnace and optimization of low-carbon emissions. JOM, 78, 2755–2771. https://doi.org/10.1007/s11837-026-05762-0

[6] Lv, J., Li, Z., Jia, L., & Dou, Y. (2025). Numerical simulation study on the performance of a new gas burner for radiant heating. Fluids, 10(9), 245. https://doi.org/10.3390/fluids10090245

[7] Sung, Y., Kim, S., Jang, B., Oh, C., Jee, T., Park, S., Park, K., & Chang, S. (2021). Nitric oxide emission reduction in reheating furnaces through burner and furnace air-staged combustions. Energies, 14(6), 1599. https://doi.org/10.3390/en14061599

[8] Ashouri, A., Zabetian Targhi, M., & Mazaheri, K. (2025). Enhancing thermal performance and reducing pollutant emissions in a steel reheating furnace through MILD combustion: A study on air distribution and outlet design. International Communications in Heat and Mass Transfer, 161, 108535. https://doi.org/10.1016/j.icheatmasstransfer.2025.108535

[9] Ashouri, A., Zabetian Targhi, M., & Karami, S. (2025). Inlet/outlet design and equivalence ratio adjustment of an industrial MILD steel furnace. International Communications in Heat and Mass Transfer, 169, 109549. https://doi.org/10.1016/j.icheatmasstransfer.2025.109549

[10] Sung, Y. (2023). Advances in reduction technologies of gas emissions (CO₂, NOₓ, and SO₂) in combustion-related applications. Energies, 16(8), 3469. https://doi.org/10.3390/en16083469

[11] Ali, G., & Zhou, Y. (2025). A detailed numerical analysis of NOₓ formation and destruction during MILD combustion of CH₄/H₂ blends using a skeletal mechanism. International Journal of Hydrogen Energy, 103, 119–131. https://doi.org/10.1016/j.ijhydene.2025.01.086

Downloads

Published

2026-11-15

Issue

Section

Articles

How to Cite

Nie, W. (2026). Application and Performance Analysis of Low-NOx Combustion Technology in Metallurgical Heating Furnaces. International Core Journal of Engineering, 12(11), 29-35. https://doi.org/10.6919/ICJE.202611_12(11).0003