Research Progress on Micro-vibration and Thermal Stability Control of Vehicle-mounted Optomechanical Systems
DOI:
https://doi.org/10.6919/ICJE.202611_12(11).0001Keywords:
Vehicle-Mounted Optomechanical System; Micro-Vibration Isolation; Active Vibration Isolation; Optical-Axis Stabilization; Precision Temperature Control; Athermal Design; Thermal–Mechanical–Optical Coupling.Abstract
Vehicle-mounted optomechanical systems are optoelectronic equipment that integrate precision optical payloads, servo-stabilized platforms, and environmental control units on a mobile chassis, combining the high precision of fixed optical measuring equipment with the rapid deployment capability of mobile equipment. Compared with fixed sites, vehicle-mounted platforms are subjected to multi-source disturbances during transportation and operation, including road-surface vibration, ground pulsation, equipment heat generation, and diurnal temperature differences caused by solar irradiation. Micro-vibration suppression and thermal-induced optical-axis drift control have become the two core problems constraining the performance of high-precision vehicle-mounted optomechanical systems. Focusing on these two main lines, this paper systematically reviews the disturbance transmission paths of vehicle-mounted optomechanical systems; summarizes the progress of micro-vibration suppression technology from three directions-passive vibration isolation, six-degree-of-freedom active vibration isolation, andfast-steering-mirror precise stabilization -and reviews the progress of thermal stability control technology from athermal structural design, distributed precision temperature control, and thermo-optical compensation; analyzes the magnitude and engineering constraints of these two types of disturbances in typical applications such as mobile precision optical observation, vehicle-mounted high-energy laser tests, and vehicle-mounted optoelectronic measurement; points out existing bottlenecks, including the still-insufficient thermal–mechanical–optical multi-field coupling modeling and online decoupling, the prominent contradiction between the low-frequency performance of active vibration isolation and the weight cost, and the conflict between the precision thermal stabilization time constant and rapid deployment requirements; and finally looks forward to development trends in four directions: lightweight composite-material integrated athermalization, advanced six-degree-of-freedom active vibration isolation, thermal–mechanical–optical joint active compensation, and multi-parameter online monitoring.
Downloads
References
[1] Huang, J. Q., Yu, Y., Ding, X. Z., Jian, Y., Zhang, C. H., & Li, Z. (2026). Opto-mechanical structure design of vehicle-mounted long-wave infrared linear array scanning imaging system. Optics and Precision Engineering, 34(4), 559–570. https://doi.org/10.37188/ope.20263404.0559
[2] Gao, Q. J., Wang, C., Wang, Q. L., Wang, X. M., Yu, Y., Liu, Z. Y., & Liu, Y. J. (2023). Stability of supporting platform for vehicle-mounted optoelectronic theodolite. Acta Optica Sinica, 43(21), Article 2112004. https://doi.org/10.3788/aos230948
[3] Li, G. H., Ou, L., Xie, C. L., et al. (2018). Optical axis stabilization technology based on FSM on a vehicle platform. Laser Technology, 42(4), 470–475.
[4] Qi, Y., Wang, H. L., Yao, J. K., et al. (2025). Visual axis vibration damping stability frame design based on flexible structure. Journal of Applied Optics, 46(4), 758–765.
[5] Zheng, F. Z., Ning, F., Wang, P. Q., Huo, L. Y., & Zhao, Z. C. (2018). Design of vibration damping system for airborne optoelectronic equipment and research on stability accuracy test. Journal of Applied Optics, 39(4), 453–459. https://doi.org/10.5768/jao201839.0401002
[6] Yao, J. M., Feng, J. Y., Wu, S. Q., et al. (2024). Design of the vibration isolator for atomic beam chamber of a transportable optical clock. Journal of Astronautic Metrology and Measurement, 44(1), 20–28.
[7] Zuo, X. Z., Wang, H. L., Zhou, Y., Xi, G. Y., Zhang, Y. L., Zhao, H. J., & Yu, B. W. (2023). Research on thermal optical properties and thermal control technology of primary mirror assembly. Journal of Applied Optics, 44(3), 20–28. https://doi.org/10.5768/jao202344.0301005
[8] Wang, X., & Zhao, C. Q. (2023). Low thermal expansion optimization of composite support structure for missile-borne optical system. Infrared and Laser Engineering, 52(5), Article 20220742. https://doi.org/10.3788/irla20220742
[9] Qiu, B., Li, G. S., Liu, J. M., et al. (2021). Design of integral temperature-controlling cabinet in vehicle. Cryogenics and Superconductivity, 49(3), 99–103.
[10] Hu, H. L., Peng, X. K., Guo, X. M., et al. (2025). Design and experimental verification of portable laser anti-UAV system. Laser & Infrared, 55(2), 26–32.
[11] Liu, R. H., Wang, G. Y., Kang, L., et al. (2021). Research on decoupling control strategy of parallel 6-DOF active vibration control platform. Atomic Energy Science and Technology, 55(7), 1338–1344.
[12] Kong, Y. F., Huang, H., & Li, Q. (2020). Vibration suppression for payload low-order modes using a Stewart platform. Optics and Precision Engineering, 28(11), 2507–2516. https://doi.org/10.37188/ope.20202811.2507
[13] Wang, H. L., Jiang, S. Z., Du, Y. L., Xie, N., & Cheng, G. (2023). Research on line-of-sight inertial stabilization technology for airborne optoelectronic systems. Scientia Sinica Technologica, 53(9), 1476–1492. https://doi.org/10.1360/sst-2022-0347
[14] Ming, M., Chen, T., & Xu, T. S. (2019). Vehicular daytime high-resolution imaging system based on phase diversity technology. Acta Photonica Sinica, 48(3), Article 312003. https://doi.org/10.3788/gzxb20194803.0312003
Downloads
Published
Issue
Section
License
Copyright (c) 2026 International Core Journal of Engineering

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.




