Design of Core Drilling Rig Data Monitoring System based on STM32

Shuaipeng Li; Xiao Zeng

doi:10.6919/ICJE.202608_12(8).0013

Authors

Shuaipeng Li School of Mechanical Engineering, Xihua University, Chengdu 610039, China
Xiao Zeng School of Mechanical Engineering, Xihua University, Chengdu 610039, China

DOI:

https://doi.org/10.6919/ICJE.202608_12(8).0013

Keywords:

STM32F407VGT6; Boke Screen; Kinco DTools; Data Monitoring System.

Abstract

To improve the drilling efficiency and intelligence level of core drilling rigs, a local data monitoring system was designed based on the STM32F407VGT6 and the Boke Screen F150E. The system uses Kinco DTools configuration software for interface design and employs CAN bus communication technology to monitor and communicate with the host computer. Test results show that the system can monitor various parameters of the core drilling rig in real time, which can enhance the intelligence level of the rig and has certain practical engineering value.

Downloads

Download data is not yet available.

References

[1] Zeng, Z. W., & Ye, W. C. (2026). Analysis of geological exploration and safety technology in geological prospecting engineering. World Nonferrous Metals, 7, 160–162. https://doi.org/10.3969/j.issn.1002 5065.2026.07.054

[2] Tang, X. R., Liu, F. B., & Fan, L. F. (2025). Fully hydraulic geological core drilling rig. Drilling Engineering, 52(6), 154–155. https://doi.org/10.12143/j.ztgc.2025.06.021

[3] Sun, F. Y., & Chen, J. J. (2025). Design of core drilling rig monitoring system based on CODESYS. Plant Maintenance Engineering, 9, 14–16. https://doi.org/10.16621/j.cnki.issn1001 0599.2025.05.05

[4] Lu, C. D., Gan, C., Chen, L. F., et al. (2023). Research progress and development prospects of intelligent control in geological drilling process. Coal Geology & Exploration, 51(9), 31–43.

[5] Zhang, X. X., Liang, B. W., & Zhang, X. L., et al. (2023). Research progress on intelligent drilling equipment and technology. Coal Geology & Exploration, 51(9), 20–30.

[6] Tang, X. R., Liu, F. B., & Fan, L. F. (2025). Fully hydraulic geological core drilling rig. Drilling Engineering, 52(6), 154–155. https://doi.org/10.12143/j.ztgc.2025.06.021

[7] STMicroelectronics. (2024). STM32F407xx datasheet: Arm® Cortex® M4 32b MCU+FPU, 210DMIPS, up to 1MB Flash, 192KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces & camera [Datasheet]. https://www.st.com/resource/en/datasheet/stm32f407vg.pdf

[8] Texas Instruments. (2015). ADC128S102: 8 Channel, 500 ksps to 1 Msps, 12 Bit A/D Converter (Document SNAS298G) [Datasheet]. https://www.ti.com/lit/ds/symlink/adc128s102.pdf

[9] Kinco Automation (Shanghai) Co., Ltd. (2023). F150E waterproof dedicated human machine interface [Product datasheet]. https://www.kinco.cn/productdetail/f150ew38.html